DT 30 IE - IEMs For Professional Sound Quality & Noise Isolation
SKU: BD1002511
Description
For musicians who want to get the most out of their performance.
The DT 30 IE boasts balanced monitoring sound, high passive noise isolation of up to 39 dB, and an IP54-certified design that can withstand even the most intense performances – whether in the rehearsal room, at a club gig, or on the big stage.
Designed for real-world stage conditions
DT 30 IE is specifically designed to meet the demands of modern live performances. Its powerful 11-mm dynamic driver delivers a balanced sound signature spanning a frequency range of 5-20,000 Hz. As a result, it enables ambitious musicians to perform with clarity and control, even in environments with high ambient noise levels, complex mixes or changing venue acoustics.
DT 30 IE’s passive noise isolation, which reaches up to 39 dB, also plays a key role in this context. Rather than having to battle against loud drums, guitar amps and audience noise, artists can focus on their mix while being well shielded.
Secure fit and certified protection
The new in-ear monitor offers both comfort and durability. The compact, ergonomic earpiece sits snugly in the ear, even during long rehearsals and high-energy performances. Weighing just 2.7 grams per earpiece, this in-ear monitor is also exceptionally lightweight. The package includes three pairs of silicone ear tips and three pairs of foam ear tips in sizes S, M and L.
Because sweat, dirt particles, tight changeovers, and sometimes even rainy outdoor concerts are part of everyday life for many musicians, DT 30 IE is explicitly protected against dust and splashing water in accordance with protection class IP54. A strong selling point in a market where many products promise stage suitability but rarely have the corresponding certification.
Three pillars of exceptional performance
The Kevlar®-reinforced, detachable cable with an MMCX connector system is built to last and can be replaced if necessary. Gold-plated connectors and integrated memory wire ensure a stable connection and secure fit. The interchangeable components and separately available replacement parts ultimately make the DT 30 IE a long-term monitoring solution.
Technical Data DT 30 IE
|
Transducer principle |
Dynamic |
|
|
Operating principle |
Closed |
|
|
Wearing style |
In-ear |
|
|
Frequency response |
5 Hz – 20,000 Hz |
|
|
Nominal impedance |
18 Ohm |
|
|
Sound pressure level [dB SPL] @ |
111 dB SPL |
|
|
Sound pressure level [dB SPL] @ |
128 dB SPL |
|
|
Total harmonic distortion @ 1 mW |
0.08 % @ 500 Hz |
|
|
Maximum sound pressure level |
137 dB SPL |
|
|
Isolation from ambient noise |
up to 39 dB |
|
|
Weight (without cable and ear tip) |
2.7 g per earphone |
|
|
Cable length and type |
smooth cable, 1.4 m, detachable, dual-sided |
|
|
Connector |
MMCX to 3.5 mm 3-pole stereo jack |
|
|
Protection rating |
|
|
|
Scope of delivery |
1 pair DT 30 IE earphones 1.4 m cable with MMCX connector & 3.5mm 3-pole plug 3 pairs silicone ear tips (S, M, L) 3 pairs foam ear tips (S, M, L) 1 pair cerumen filters 1 Quick start guide 1 Carrying case |
Downloads
Shipping & same day dispatch Australia-wide, on orders placed by 12noon (AEST). 2-3 days to most capital cities and metro areas.
Sonically, the tiny monitors produce an impressive amount of low end, all the while retaining headroom and detail in the mids and highs.
DT 30 IE
Specifically designed to meet the demands of modern live performances. Its powerful 11-mm dynamic driver
delivers a balanced sound signature spanning
a frequency range of 5-20,000 Hz.
As a result, it enables ambitious musicians to perform with clarity and control, even in environments with high
ambient noise levels, complex mixes or
changing venue acoustics.
READY TO GO
The DT 30 IE boasts balanced monitoring sound, high
passive noise isolation of up to 39 dB, and an IP54-certified design that can withstand even the most intense performances – whether in the rehearsal room,
at a club gig, or on the big stage.
You're ready to go!
AN INVESTMENT
The Kevlar®-reinforced, detachable cable with an MMCX connector system is built to last and can be replaced if necessary. Gold-plated connectors and integrated memory wire ensure a stable connection and
a secure fit.
The interchangeable components and separately available replacement parts ultimately make the DT 30 IE
a long-term monitoring solution.
HEARING PROTECTION
The compact, ergonomic earpiece sits snugly in the ear, even during long rehearsals and high-energy performances.
Weighing just 2.7 grams per earpiece, this in-ear monitor is also exceptionally lightweight. The package includes three pairs of silicone ear tips and three pairs of foam
ear tips in sizes S, M and L.
STAY FOCUSED
DT 30 IE’s passive noise isolation, which reaches up to 39 dB, also plays a key role, rather than having to battle against loud drums, guitar amps and audience noise, you can
focus on the mix while being well shielded.
Be @ your best!
WHAT'S IN THE BOX?
Blog posts
Best Open-Back Studio Headphones in 2026!
DT 990 PRO X vs. DT 990 PRO vs. DT 900 PRO X vs. DT 1990 PRO MK II If you’re trying to decide on which open-back studio headphones you should buy, you’ll quickly notice there’s a wide range of be...
Best Studio Headphones for Monitoring Under $400 in 2026
Over the decades Studios, broadcasters, podcasters, and gamers alike have keep returning to our professional range of DT headphones for two simple reasons: they offer a high level of sound quality ...
beyerdynamic DT 770 PRO vs. DT 990 PRO: A Complete Comparison
Walk into almost any recording studio, podcast booth, or bedroom production setup, and there's a good chance you'll spot one of these two headphones sitting on the desk. The beyerdynamic DT 770 PRO...