Description
Easy handling, high gain before feedback and a good fit, this perfectly sums up the characteristics of the TG H34 headset microphone with a cardioid polar pattern. That is why it fits perfectly for theatres, stages, especially for musicians who act as vocalists.
But also beside the stage the TG H34 makes a good figure. It is suitable for every kind of presentation and application where hands free is needed. The flexible gooseneck allows and easy and fast positioning.
For wired operation at a phantom powering input, the optional MA-PVA is necessary.
TG Pin Out:
The TG H34 is compatible with all TG 1000 Beltpack Transmitters that use the TG Pin Out (grey ON/OFF switch). This allows the combination with every system using the TG Pin Out and therefore offers maximum flexibility.
Transducer type: . . . . . . . . . . . .Condenser (back electret)
Operating principle: . . . . . . . . . . . Pressure gradient
Polar pattern: . . . . . . . . . . . . . . .Supercardioid
Frequency response 
Close miking: . . . . . . . . . . . . .20 - 13,000 Hz
Distant miking (measured at 1 m): . . . . . . . . . . . 180 - 13,000 Hz
Open circuit voltage: . . . . . . . . . . . . .6.0 mV/Pa; -44.5 dBV ±3 dB*
Nominal impedance: . . . . . . . . . . . . approx. 700 ohm
Load impedance: . . . . . . . . . . . . . . . . . . > 3.5 k ohm
Max. SPL at 1 kHz: . . . . . . . . . . . . . . . . .119 dB*
Equivalent SPL:  . . . . . . . . . . . . . . . . .31.5 dB SPL*
Power supply: . . . . . . . . . . . . . .Direct current 1.5 - 9 V
Max. power consumption: . . . . . . . . . . . . . .780 µA
Connector: . . . . . . . . . . . . . 4-pin Tiny QG
Pin 1 = 0 V
Pin 2 = AF output, bias voltage
Pin 3 = -
Pin 4 = -
Dimensions
Diameter:  . . . . . . . . . . 15 mm
Length microphone boom: . . . . . . . . . . . .95 mm
Weight: . . . . . . . . . . . . .36 g
*measured with a supply voltage of U = 5 V DC and a load resistance of 2.2 k ohm
Downloads
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.