TG V96c (Discontinued - Available Whilst Stock Lasts)

Every comparison needs a reference ‚data, specifications, properties that can be measured against. For the vocal microphones of the Touring Gear series, the TG V96 true condenser microphone, the benchmark for live vocals assumes this role.

The strength of the TG V96 lies in its absolutely faithful reproduction - even of the finest nuances and on stage every detail counts. The microphones exterior stands out for its sophisticated design, with a special coated surface that is pleasant to the touch. But it is what's inside that makes the TG V96 into a top-class microphone and makes it stand out with vocalists, professional rental companies and technicians: this real condenser microphone shines with a captivatingly natural sound. The subtle treble boost provides an open, finely detailed and unobtrusive sound pattern.

Further advantages: the TG V96 can be operated with phantom powering down to 11V without affecting the performance. The 5-layer pop protection made from metal gauze of differing mesh sizes and a sintered plate optimally suppresses plosives while significantly improving the rear-attenuation.

The TG V96 is rugged enough for the stage and is supplied with an individual frequency response curve print out. Handcrafted in Germany.

Features:

High-quality vocal microphone
Frequency-independent cardioid polar pattern
Compensated proximity effect
Wire mesh basket without foam
Shock mounted microphone transducer and electronics

Specifications:

Transducer type . . . . . . . . . . . . . . . . Condenser
Operating principle. . . . . . . . . . . . . . Pressure gradient
Polar pattern . . . . . . . . . . . . . . . . . . Cardioid
Frequency response
Close miking . . . . . . . . . . . . . . . . . . 20 - 20,000 Hz
Distant miking (measured at 1 m). . . 55 - 20,000 Hz
Open circuit voltage . . . . . . . . . . . . . 4 mV/Pa (-48 dBV) ±2 dB
Nominal impedance . . . . . . . . . . . . . 60 ohm
Load impedance. . . . . . . . . . . . . . . . 1 k ohm
Max. SPL at 1 kHz . . . . . . . . . . . . . . 150 dB
Signal-to-noise ratio . . . . . . . . . . . . . 64 dB [CCIR, Q-Peak]
Equivalent SPL . . . . . . . . . . . . . . . . . 20 dB [A, RMS]
In-phase rejection 50 - 20,000 Hz. . .  60 dB
Power supply . . . . . . . . . . . . . . . . . . Phantom power: 24 - 48 V (recommended: 48 V) Current consumption . . . . . . . . . . . . 4.3 mA
Connection . . . . . . . . . . . . . . . . . . . 3-pin male XLR, 1 = ground 2 = + 3 = -
Dimensions
Length . . . . . . . . . . . . . . . . . . . . . . . 185 mm
Shaft diameter . . . . . . . . . . . . . . . . . 26 mm
Head diameter . . . . . . . . . . . . . . . . . 48 mm
Weight. . . . . . . . . . . . . . . . . . . . . . . 330 g