Classis GM 313 SP (Discontinued - Available Whilst Stock Lasts)

The gooseneck microphones of the Classis series integrate cardioid electret microphones inside the very small microphone head. They can be used for all kinds of applications where a high-quality, but also discrete microphone is demanded. The LED ring displays the ready-to-talk status of the microphone.

Due to the cardioid polar pattern this microphone has a high gain before feedback and provides highest intelligibility of speech. Therefore, the microphones are ideal for the use with lecterns, sound reinforcement applications, conferencing, high quality talkback and paging systems. All microphones feature the innovative Scudio technology, making the microphones absolutely insensitive to wireless communication devices such as mobile phones.

The microphone is mounted on a 6 mm thick gooseneck and due to its mat black, non-glare surface almost invisible. The microphones can be powered with any phantom power source supplying 8 to 52 volts.

With the SP variants you can select via the programmable button between the operating modes ON/OFF, Push-To-Talk and Push-To- Mute. The microphone button can also be disabled. The frequency response can be set with a separate switch in two stages: Linear or with low-cut filter to suppress low-frequency interference. The illuminated ring indicating the microphone status can be deactivated.

Features:

Highest audio quality
Sturdy and robust 6 mm gooseneck
RFI-proof due to Scudio technology
High sensitivity
Excellent high gain before feedback
Unobtrusive due to small dimensions
Non-glare surface
With LED ring
8 - 52 V phantom power
With programmable button, switchable low-cut filter and switchable LED ring
Length 300mm

Specifications:

Operating principle . . . . . . . . . . . . . . . Pressure gradient
Polar pattern. . . . . . . . . . . . . . . . . . . . Cardioid
Frequency response . . . . . . . . . . . . . . 50 - 19,000 Hz
Open circuit voltage . . . . . . . . . . . . . . 17 mV/Pa
Nominal impedance . . . . . . . . . . . . . . < 200 ohm
Load impedance . . . . . . . . . . . . . . . . . ‚1 k ohm
Signal to noise ratio / noise voltage. . . 69 dB [A] / 6.0 µV [A]
Max. SPL. . . . . . . . . . . . . . . . . . . . . . . 107 dB [SPL @ 1% THD]
Equivalent SPL . . . . . . . . . . . . . . . . . . 25 dB [A]
Wiring. . . . . . . . . . . . . . . 3-pin male XLR
Supply voltage . . . . . . . . . . . Phantom power 8 - 52 V
Current consumption . . . . . . 2 mA
Current consumption . . . . . . . 9 mA
Current consumption LED ring with internal resistor of 500 ohm
at 5 V supply voltage . . . . . . . . . . . . . 6 mA
at 12 V supply voltage . . . . . . . . . . . . 20 mA
Dimensions Length . . . . . . . . . . . . . . . . . . . 300mm
Gooseneck diameter. . . . . . . . . . . . . . 6 mm
Shaft diameter . . . . . . . . . . . . . . . . . . 20 mm